|
|
|  | 
The Vibration Controllers exploit the power of new generation digital signal processing techniques to deliver very high degree of control accuracy and performance in vibration test applications.
The 16/32 Bit Fixed/Floating point processors specifically designed to process complex mathematical calculations & algorithms, combined with high speed simultaneous data sampling Analog-to-Digital Converters and Digital-to-Analog Converters make the whole architecture best suitable for developing all types of vibration control applications to fulfill everyday demands of industry standards, research, Space and MIL applications worldwide. | | | | | | | Swept Sine Software Specifications | | Parameters | Model - I | Model - II | Model - III | | Frequency Range | 1 Hz – 5000 Hz | 0.1 Hz – 5000 Hz | 0.08 Hz – 5000 Hz | | Control Parameter | Constant – Acc./Vel/Disp
Slope - Acceleration
| Constant – Acc./Vel/Disp..
Slope - Acc.//Vel/Disp | Constant – Acc./Vel/Disp..
Slope - Acc.//Vel/Disp | | Test Mode | Sweep Frequency Test
Fixed Frequency Test
(Discrete Step Control)
Resonance Search & Dwell
Manual Control using Keyboard
DVA Monitoring
(using ext. sinusoidal frequency input) | Sweep Frequency Test
Fixed Frequency Test
(Discrete Step Control)Resonance Search & Dwell (Optional)
-
- | Sweep Frequency Test
Fixed Frequency Test
(Discrete Step Control)
Resonance Search & Dwell (Optional)
-
- | | Input Channels | 02/04 | 08/16 | 32, expandable upto 128 | | Channel sensitivity | 1.0 to 99.99 pC/g or mV/g | 1.0 to 1000 pC/g or mV/g | 0.1 to 10000 pC/g or mV/g | | Channel Control | Single/ Multi-channel | Single/ Multi-channel | Single/ Multi-channel | Control Mode
Filters | Maximal/ Average | Maximal/ Average/ Weighted Average | Maximal/ Average/ Weighted Average | | 8th Order (analog) | Anti-aliasing (Analog/Digital) | Anti-aliasing (Analog/Digital/Tracking) | Output Channels
Filters | Drive - 12V(Pk-Pk)
COLA- proportional to frequency | Drive - 20V(Pk-Pk)
COLA- proportional to frequency | Drive - 20V(Pk-Pk)
COLA- proportional to frequency | | 8th Order (analog) | Anti-aliasing (Analog/Digital) | Anti-aliasing (Analog/Digital/Tracking) | | Digital I/O | 4 I/P, 4 O/P | 8 I/P, 8 O/P | 16 I/P, 16 O/P | | Compression Rate | 0.001 to 3.0 dB/Sec/Hz | 0.001 to 20 dB/Sec/Hz | 0.001 to 20 dB/Sec/Hz | | Compression Limit | 2.0 to 200.0 dB/s | — | — | | Control Dynamic Range | > 85 dB | > 95 dB | >105 dB | | Test Duration | Upto specified no. of sweeps or infinite.
Upto specified duration of time. | Upto specified no. of sweeps.
Upto specified duration of time. | Upto specified no. of sweeps.
Upto specified duration of time. | | Online Display | Parameters | Parameters | Parameters | | | Frequency, Programmed Control
Level, Measured Control Level,
Servo Voltage, No. of sweeps
elapsed/ remaining, Date , Time,
Displacement/Velocity/Acceleration
of each channel.
| Frequency, Programmed Control
Level, Measured Control Level,
Servo Voltage, No. of sweeps
elapsed/ remaining, Date , Time,
Displacement/Velocity/Acceleration
of each channel. | Frequency, Programmed Control
Level, Measured Control Level,
Servo Voltage, No. of sweeps
elapsed/ remaining, Date , Time,
Displacement/Velocity/Acceleration
of each channel. | | | Graph | Graph | Graph | | | Control Curve (Control Vs.
Frequency)
Drive Curve (Drive Vs. Frequency)
Individual Channel Response
(Channel Values Vs. Frequency)
Transfer Function (Channel ‘Y’/
Channel ‘X’ Vs. Frequency)
Alarm/ Abort limit region | Control Curve (Control Vs.
Frequency)
Drive Curve (Drive Vs. Frequency)
Individual Channel Response
(Channel Values Vs. Frequency)
Transfer Function (Channel ‘Y’/
Channel ‘X’ Vs. Frequency)
Alarm/ Abort limit region
Composite Display | Control Curve (Control Vs.
Frequency)
Drive Curve (Drive Vs. Frequency)
Individual Channel Response
(Channel Values Vs. Frequency)
Transfer Function (Channel ‘Y’/
Channel ‘X’ Vs. Frequency)
Alarm/ Abort limit region
Composite Display | Graph
Annotations | Selection of Y-axis value as
acceleration/Velocity/Displacement.
Two lines of annotation programmable
by the operator for each test to identify
the test conducted. | Selection of Y-axis value as
acceleration/Velocity/Displacement.
Two lines of annotation programmable
by the operator for each test to identify
the test conducted. | Selection of Y-axis value as
acceleration/Velocity/Displacement.
Two lines of annotation programmable
by the operator for each test to identify
the test conducted. | Storage of
Test Data | To disk at pre-configured intervals in
tabular text format.
Export of test data to Microsoft Excel. | To disk at pre-configured intervals in
tabular text format.
Export of test data to Microsoft Excel. | To disk at pre-configured intervals in
tabular text format.
Export of test data to Microsoft Excel. | Storage of
Test Graph | Storage of Graph in WMF/ BMP format
on mouse click.
Export of test graph to Microsoft Word. | Storage of Graph in WMF/ BMP format
on mouse click.
Export of test graph to Microsoft Word. | Storage of Graph in WMF/ BMP format
on mouse click.
Export of test graph to Microsoft Word. | Posttest Report
Generation | Facilitates report generation of test
conducted.
Export of graph to Microsoft Word. | Facilitates report generation of test
conducted.
Export of graph to Microsoft Word. | Facilitates report generation of test
conducted.
Export of graph to Microsoft Word. | Safety features/
Protections | Loop check feature to verify physical
setting of the system before staring
actual test.
Independent alarm and abort profile in
terms of + (0.5 to 20 dB) of reference
test profile over the entire frequency
range.
Auto test shutdown in case of
exceeding the maximum ‘g’ level
programmed.
Auto test shutdown in case of control
exceeding the abort limit.
Password authorization to operate the
software. | Loop check feature to verify physical
setting of the system before staring
actual test.
Independent alarm and abort profile in
terms of + (0.5 to 20 dB) of reference
test profile over the entire frequency
range.
Auto test shutdown in case of
exceeding the maximum ‘g’ level
programmed.
Auto test shutdown in case of control
exceeding the abort limit.
Password authorization to operate the
software. | Loop check feature to verify physical
setting of the system before staring
actual test.
Independent alarm and abort profile in
terms of + (0.5 to 20 dB) of reference
test profile over the entire frequency
range.
Auto test shutdown in case of
exceeding the maximum ‘g’ level
programmed.
Auto test shutdown in case of control
exceeding the abort limit.
Password authorization to operate the
software. | | | | | | |
| Broadband Random Control Software | | Parameters | Model - I | Model - II | Model - III | | Test Mode | Pseudo Random
True Random | True Random | True Random | | Frequency Range | 500, 1000, 2000, 3000 or 4000 Hz | 125,250,500,1000,2000 or 4000 Hz | 31.25,62.5,125,250,500,1000,2000 or 4000 Hz | | Frequency Lines | Frequency Lines | 100, 200, 300,400 or 500 | 100, 200, 400 or 800(1600 optional) | | Input Channels | 02/04 | 08/16 | 32, expandable upto 128 | | Channel type | Selectable for Charge/ mV/ ICP | Selectable for Charge/ mV/ ICP | Selectable for Charge/ mV/ ICP | | Channel sensitivity | 1.0 to 99.99 pC/g or mV/g | 1.0 to 1000 pC/g or mV/g | 0.1 to 10000 pC/g or mV/g | | Channel Control | Single/ Multi-channel | Single/ Multi-channel | Single/ Multi-channel | Control Mode
Filters | Maximal/ Average | Maximal/ Average/ Weighted Average | Maximal/ Average/ Weighted Average | | 8th Order (analog) | Anti-aliasing (Analog/Digital) | Anti-aliasing (Analog/Digital/Tracking) | Output Channels
Filters | Drive - 20V (Peak-Peak) | Drive - 20V (Peak-Peak) | Drive - 20V (Peak-Peak) | | 8th Order (analog) | Anti-aliasing (Analog/Digital) | Anti-aliasing (Analog/Digital/Tracking) | | Drive Signal | Continuous Gaussian Random | Continuous Gaussian Random | Continuous Gaussian Random | | Dynamic Range | > 82 dB | > 92 dB | > 102 dB | | Limit Channel | Upto 200 Grms | Upto 200 Grms | Upto 200 Grms | | Correction Rate | 0.1 to 50.0 dB/sec | 0.1 to 50.0 dB/sec | 0.1 to 50.0 dB/sec | | Crest Factor/ Sigma Clipping | 1.8 to 8 | 2 to 8 | 2 to 8 | | Degree of Freedom | 5 to 800 | 2 to 1000 | 8 to 8000 | | Loop time (typical) | 200 mS | 100 mS | 100 mS | | Test Duration | Upto 499:59:59 Hrs | Upto 999:59:59 Hrs | Upto 9999:59:59 Hrs | | Test Profile/ Spectrum | Programmable thru tabular editor.
100 segments/ break points.
Simple editing of dB/Oct or PSD/ ASD
values
Insertion, deletion & changes of levels
& slope.
Capable to virtually programme any test
profile.
Graphical presentation of profile for
visualization. | Programmable thru tabular editor.
200 segments/ break points.
Simple editing of dB/Oct or PSD/
ASD values
Insertion, deletion & changes of
levels & slope.
Capable to virtually programme any
test profile.
Graphical presentation of profile for
visualization. | Programmable thru tabular editor.
200 segments/ break points.
Simple editing of dB/Oct or PSD/ ASD
values
Insertion, deletion & changes of levels &
slope
Capable to virtually programme any test
profile.
Graphical presentation of profile for
visualization. | | Soft Test Startup Time | 1 to 30 seconds | 1 to 30 seconds | 1 to 30 seconds | | Soft Test Stop Time | 1 to 30 seconds | 1 to 30 seconds | 1 to 30 seconds | Pre-Test Loop to determine
system response before
actually starting the main test | User selectable drive level from 5 to
2000 mV rms | User selectable drive level from 0 to
1000 mV rms | User selectable drive level from 0 to 1000
mV rms | | Test Level Scheduling | User selectable : -27 to 0 dB
Duration for each level can be
programmed separately. | User selectable : -80 to 0 dB
Duration for each level can be
programmed separately. | User selectable : -80 to 0 dB
Duration for each level can
programmed separately. | | Online Display | Parameters:
Programmed Grms, Control Grms,
Individual Channel(s) Grms, Channel(s)
in Use, Scheduled Test Level, Elapsed
Test Period, Remaining Test Period,
Drive Voltage (rms), Time & Date.
Graph:
Control/ Reference test spectra (g2/Hz
Vs. Frequency)
Individual channel spectra (g2/Hz Vs.
Frequency)
Overlaid Spectra ((g2/Hz Vs.
Frequency)
Transfer function spectra CHx/CHy (
dB Vs. Frequency)
Drive spectra ( dB Vs. Frequency)
Drive signal ( Volt Vs. Frequency)
Alarm/ Abort limits in all spectra.
Display Format:
Log or linear scale.
Alarm & Abort line display.
X & Y-axis grid enable/ disable | Parameters:
Programmed Grms, Control Grms,
Individual Channel(s) Grms,
Channel(s) in Use, Scheduled Test
Level, Elapsed Test Period,
Remaining Test Period, Drive
Voltage (rms), Time & Date.
Graph:
Control/ Reference test spectra (g2/Hz
Vs. Frequency)
Individual channel spectra (g2/Hz Vs.
Frequency)
Overlaid Spectra ((g2/Hz Vs.
Frequency)
Transfer function spectra CHx/CHy (
dB Vs. Frequency)
Drive spectra ( dB Vs. Frequency)
Drive signal ( Volt Vs. Frequency)
Alarm/ Abort limits in all spectra.
Display Format:
Log or linear scale.
Alarm & Abort line display.
X & Y-axis grid enable/ disable | Parameters:
Programmed Grms, Control Grms,
Individual Channel(s) Grms, Channel(s) in
Use, Scheduled Test Level, Elapsed Test
Period, Remaining Test Period, Drive
Voltage (rms), Time & Date.
Graph:
Control/ Reference test spectra (g2/Hz
Vs. Frequency)
Individual channel spectra (g2/Hz Vs.
Frequency)
Overlaid Spectra ((g2/Hz Vs.
Frequency)
Transfer function spectra CHx/CHy (
dB Vs. Frequency)
Drive spectra ( dB Vs. Frequency)
Drive signal ( Volt Vs. Frequency)
Alarm/ Abort limits in all spectra.
Display Format:
Log or linear scale.
Alarm & Abort line display.
X & Y-axis grid enable/ disable | Graph Annotations to
identify the test conducted | Two lines of annotation programmable
by the operator for each test | User configurable message/ notes | User configurable message/ notes | | Storage of Test Data | To disk at pre-configured intervals in
tabular text format.
Export of test data to Microsoft Office | To disk at pre-configured intervals in
tabular text format.
Export of test data to Microsoft Office | To disk at pre-configured intervals in
tabular text format.
Export of test data to Microsoft Office | | Posttest Report Generation | Tabular data for PSD Vs. Frequency
Control/ Reference spectrum
Control test spectra (g2/Hz Vs.
Frequency)
Individual channel spectra (g2/Hz Vs.
Frequency)
Overlaid Spectra ((g2/Hz Vs.
Frequency)
Transfer function spectra CHx/CHy (
dB Vs. Frequency)
Drive spectra ( dB Vs. Frequency) | Tabular data for PSD Vs. Frequency
Control/ Reference spectrum
Control test spectra (g2/Hz Vs.
Frequency)
Individual channel spectra (g2/Hz Vs.
Frequency)
Overlaid Spectra ((g2/Hz Vs.
Frequency)
Transfer function spectra CHx/CHy (
dB Vs. Frequency)
Drive spectra ( dB Vs. Frequency) | Tabular data for PSD Vs. Frequency
Control/ Reference spectrum
Control test spectra (g2/Hz Vs.
Frequency)
Individual channel spectra (g2/Hz Vs.
Frequency)
Overlaid Spectra ((g2/Hz Vs.
Frequency)
Transfer function spectra CHx/CHy (
dB Vs. Frequency)
Drive spectra ( dB Vs. Frequency) | | Safety features | Loop check for proper physical
connections.
Check of programming values
limits.
Password authorization for secured
operation.
Max. ‘Grms' limit for each channel.
No. of lines for line abort
No. of loops for line abort | Loop check for proper physical
connections.
Check of programming values within
limits.
Password authorization for secured
operation.
Max. ‘Grms' limit for each channel.
No. of lines for line abort
No. of loops for line abort | Loop check for proper physical
connections.
Check of programming values within
limits.
Password authorization for secured
operation.
Max. ‘Grms' limit for each channel.
No. of lines for line abort
No. of loops for line abort | | | | | Classical Shock Controller/Arbitrary Transient / SRS Analysis & Synthesis | | Parameters | Model - I | Model - II | Model - III | | Modes of Operation | Half Sine
Triangular
Forward Saw-tooth
Backward Saw-tooth
Rectangular | Half Sine
Triangular
Forward Saw-tooth
Backward Saw-tooth
Rectangular
Trapezoidal
Arbitrary Transient
SRS Analysis & Synthesis | Half Sine
Triangular
Forward Saw-tooth
Backward Saw-tooth
Rectangular
Trapezoidal
User defined shapes
Arbitrary Transient
SRS Analysis & Synthesis | | Pulse amplitude | 1 to 200 ‘g' | 0.1 to 200 ‘g' | 0.1 to 500 ‘g' | | Pulse width | 0.5 to 50 mS | 0.1 to 100 mS | 0.1 to 1000 mS | Pre & Post Pulse Amplitude
( % of Pulse Amplitude | 5.0% to 50.0%(sine) | 5.0% to 50.0%(sine, rectangular) | 5.0% to 50.0%(sine, rectangular) | | Input Channels | 02/04 | 08/16 | 32, expandable upto 128 | | Channel sensitivity | 1.0 to 99.99 pC/g or mV/g | 1.0 to 1000 pC/g or mV/g | 0.1 to 10000 pC/g or mV/g | | Channel Control | Single/ Multi-channel | Single/ Multi-channel | Single/ Multi-channel | Control Mode
| Maximal/ Average | Maximal/ Average/ Weighted Average | Maximal/ Average/ Weighted Average | | Filters | 8th Order (analog) | Anti-aliasing (Analog/Digital) | Anti-aliasing (Analog/Digital/Tracking) | | Control Mode | Average | Average/Maximal/Weighted | Average/Maximal/Weighted | | Channel Selection | Disable/Monitor /Control & Monitor | Disable/Monitor /Control & Monitor | Disable/Monitor /Control & Monitor | | Output Channel | 8th Order (Analog) | Anti-aliasing (Analog/Digital) | Anti-aliasing (Analog/Digital/Tracking) | | Filters | 4 I/P, 4 O/P | 8 I/P, 8 O/P | 16 I/P, 16 O/P | Pre-Test Amplitude
(% of Reference Amplitude) | 10.0% to 50.0%
Pre-test is carried out to determine
response/ transfer function of the
Vibration System by sending a low
level signal. This feature expedites the
equalization process at the time of
actual testing and safeguards the
product from getting over tested due
to pulses consumed in equalization. | 5% to 50.0%
Pre-test is carried out to determine
response/ transfer function of the
Vibration System by sending a low
level signal. This feature expedites
the equalization process at the time
of actual testing and safeguards the
product from getting over tested due
to pulses consumed in equalization | 5% to 50.0%
Pre-test is carried out to determine
response/ transfer function of the
Vibration System by sending a low
level signal. This feature expedites the
equalization process at the time of
actual testing and safeguards the
product from getting over tested due
to pulses consumed in equalization | | Pulse Repetition Rate | 50.0 to 3000 mS | 20.0 to 3000 mS | 10.0 to 5000 mS | Total no. of pulses to be
generated | 1 to 100000 | 1 to 100000 | 1 to 100000 | | Online Display | Parameters:
Pulse Width, Reference Pulse
Amplitude (g), Control Pulse
Amplitude (g), Drive Signal (V), Total
Pulse, Pulse Elapsed, Pulse
Remaining, Individual Channel Level,
Channel Mode (Control/ Monitor),
Displacement (mm), Velocity (mm/s),
Date, Time.
Graph:
Control graph (g vs. time), Individual
channel graph (g vs. time), Drive
graph (volt vs. time), Alarm/ Abort
limit region | Parameters:
Pulse Width, Reference Pulse
Amplitude (g), Control Pulse
Amplitude (g), Drive Signal (V), Total
Pulse, Pulse Elapsed, Pulse
Remaining, Individual Channel Level,
Channel Mode (Control/ Monitor),
Displacement (mm), Velocity (mm/
s), Date, Time.
Graph:
Control graph (g vs. time), Individual
channel graph (g vs. time), Drive
graph (volt vs. time), Alarm/ Abort
limit region | Parameters:
Pulse Width, Reference Pulse
Amplitude (g), Control Pulse
Amplitude (g), Drive Signal (V), Total
Pulse, Pulse Elapsed, Pulse
Remaining, Individual Channel Level,
Channel Mode (Control/ Monitor),
Displacement (mm), Velocity (mm/s),
Date, Time.
Graph:
Control graph (g vs. time), Individual
channel graph (g vs. time), Drive
graph (volt vs. time), Alarm/ Abort
limit region | | Graph Annotations | Two lines of annotation
programmable by the operator for
each test to identify the test
conducted. | User configurable message/ notes | User configurable message/ notes | | Storage of Test Data | To disk at pre-configured intervals in
tabular text format & waveforms | To disk at pre-configured intervals in
tabular text format & waveforms | To disk at pre-configured intervals
in tabular text format & waveforms | | Storage of Test Graph | Storage of waveform into user
defined file.
Export of test graph to Microsoft
Office | Storage of waveform into user
defined file.
Export of test graph to Microsoft
Office | Storage of waveform into user
defined file.
Export of test graph to Microsoft
Office | | Posttest Report Generation | Facilitates report generation of test
conducted.
Export of graph to Microsoft Office | Facilitates report generation of test
conducted.
Export of graph to Microsoft Office | Facilitates report generation of test
conducted.
Export of graph to Microsoft Office | Safety features/
Protections | Loop check feature thru Pre-test to
verify physical setting of the system
before starting actual test.
Independent alarm and abort profile
in terms of ± (1.0 to 50.0 %) of
reference pulse acceleration.
Auto test shutdown in case of
control exceeding the abort limit or
lines exceeds for set no. of loops.
Limiting abort level Grms on each
channel.
Password authorization to operate
the software. | Loop check feature thru Pre-test to
verify physical setting of the system
before starting actual test.
Independent alarm and abort profile
in terms of ± (1.0 to 50.0 %) of
reference pulse acceleration.
Auto test shutdown in case of control
exceeding the abort limit or lines
exceeds for set no. of loops.
Limiting abort level Grms on each
channel.
Password authorization to operate the
software. | Loop check feature thru Pre-test to
verify physical setting of the
system before starting actual test.
Independent alarm and abort
profile in terms of ± (1.0 to 50.0
%) of reference pulse acceleration.
Auto test shutdown in case of
control exceeding the abort limit or
lines exceeds for set no. of loops.
Limiting abort level Grms on each
channel.
Password authorization to operate
the software. | | | | | | | | | | Random-on-Random Control Software | | Parameters | Model - I | Model - II | Model - III | | Independent no. of narrowband profile | —- | 1 to 10 | 1 to 10 | | Drive Signal | —- | Swept narrowband Gaussian
random combined with broadband
Gaussian random | Swept narrowband Gaussian random
combined with broadband Gaussian random | | Breakpoint table | —- | Constant/ variable | Constant/ variable | | Sweep Rate | —- | Oct/min or Hz/sec or time/sec | Oct/min or Hz/sec or time/sec | | Star frequency | —- | Any value between the available
frequency range | Any value between
the available frequency range | | Start direction | —- | Up/down | Up/down | | Run Schedule | —- | Broadband random on/off,
Narrowband sweeping on/off
Narrowband on/off | Broadband random on/off,
Narrowband sweeping on/off
Narrowband on/off | | Safety | —- | User configurable ramp up rate in dB/sec | User configurable ramp up rate in dB/sec | | Sine-on-Random Control Software | | Independent no. of Sine tones | 1 to 8 | 1 to 10 | 1 to 10 | | Drive Signal | Multiple analog sweeping sine tone
combine with continuous broadband
Gaussian random | Multiple analog sweeping sine tone
combine with continuous
broadband Gaussian random | Multiple analog sweeping sine tone
combine with continuous
broadband Gaussian random | | COLA output for Sine tone | —- | 1 | 1 | | Sweeping | Fixed sine tones | Fixed/ sweeping | Fixed/ sweeping | | Sweep Rate | —- | Oct/min or Hz/sec or time/sweep | Oct/min or Hz/sec or time/sweep | | Stat frequency | Any value between the available
frequency range | Any value between the available
frequency range | Any value between the available
frequency range | | Start direction | —- | Up/down | Up/down | | Sine tone level | Constant Acceleration | Constant Acceleration | Constant Acceleration | | Run Schedule | Variable pre-test level & duration | Variable pre-test level & duration
Broadband random on/off
Sine on/off per tone
Start sweep per tone | Variable pre-test level & duration
Broadband random on/off
Sine on/off per tone
Start sweep per tone | | Safety | Alarm/Abort limits | Alarm/Abort limits
User configurable ramp up rate in
dB/sec | Alarm/Abort limits
User configurable ramp up rate in
dB/sec | | Storage of Test Data | To disk at pre-configured intervals in
tabular text format & waveforms | To disk at pre-configured intervals in
tabular text format & waveforms | To disk at pre-configured intervals
in tabular text format & waveforms | | Storage of Test Graph | Storage of waveform into user
defined file.
Export of test graph to Microsoft
Office | Storage of waveform into user
defined file.
Export of test graph to Microsoft
Office | Storage of waveform into user
defined file.
Export of test graph to Microsoft
Office | | Posttest Report Generation | Facilitates report generation of test
conducted.
Export of graph to Microsoft Office | Facilitates report generation of test
conducted.
Export of graph to Microsoft Office | Facilitates report generation of test
conducted.
Export of graph to Microsoft Office | Safety features/
Protections | Loop check feature thru Pre-test to
verify physical setting of the system
before starting actual test.
Independent alarm and abort profile
in terms of ± (1.0 to 50.0 %) of
reference pulse acceleration.
Auto test shutdown in case of
control exceeding the abort limit or
lines exceeds for set no. of loops.
Limiting abort level Grms on each
channel.
Password authorization to operate
the software. | Loop check feature thru Pre-test to
verify physical setting of the system
before starting actual test.
Independent alarm and abort profile
in terms of ± (1.0 to 50.0 %) of
reference pulse acceleration.
Auto test shutdown in case of control
exceeding the abort limit or lines
exceeds for set no. of loops.
Limiting abort level Grms on each
channel.
Password authorization to operate the
software. | Loop check feature thru Pre-test to
verify physical setting of the
system before starting actual test.
Independent alarm and abort
profile in terms of ± (1.0 to 50.0
%) of reference pulse acceleration.
Auto test shutdown in case of
control exceeding the abort limit or
lines exceeds for set no. of loops.
Limiting abort level Grms on each
channel.
Password authorization to operate
the software. | | | | | | | |